Access

Set device access parameters

Get device access Parameters.

Request address

​/v1​/device​/access

Request method

POST

• Body Type: application/json

Request parameters

Parameter name	Type	Description	Remark
open_door_type	Int	Door opening mode, 0: Local relay, 1: Network relay, 2: Wiegand port 26(24) 3: Wiegand port 26(8+16), 4: Wiegand port 32, 5: Wiegand port 34, 6: Local relay + Wiegand port 34
keep_door_open_duration	Int	The duration of keeping the door open, that is, the time interval from issuing the door opening command to issuing the door closing command (unit: s) Value range: [1, 30], default 6s
gpio_a	Int	GPIO A-output port, 1-None, 2-Doorbell, 3-Alarm
gpio_b	Int	GPIO B-input port, 1-None, 2-Door sensor, 3-Exit button, 4-Fire signal
gpio_c	Int	GPIO C-input port, 1-None, 2-Door sensor, 3-Exit button, 4-Fire signal
wigan_input	Int	Wiegand input port, 1-None, 2: Wiegand 26 (8+16bit ID); 3: Wiegand 26 (24bit ID); 4: Wiegand 32; 5: Wiegand 34;
tamper	Boolean	Device tamper alarm switch, false: off, true: on
force_open	Boolean	Forced door open alarm switch
network_relay_address	String	Network delay IP address
door_sensor_timeout	Int	Door sensor timeout duration (unit: s)	Default：3

Request example

{
        "open_door_type": 0,
        "keep_door_open_duration": 6,
        "gpio_a": 1,
        "gpio_b": 1,
        "gpio_c": 1,
        "wigan_input": 4,
        "tamper": true,
        "force_open": true,
        "network_relay_address": "127.0.0.1",
        "door_sensor_timeout": 3
    }

Response example

{
    "data": null,
    "code": 200,
    "msg": "OK"
}

---

Get device access parameters

Get device access control configuration.

Request address

​/v1​/device​/access

Request method

GET

Response example

{
    "data": {
        "open_door_type": 0,
        "keep_door_open_duration": 6,
        "gpio_a": 1,
        "gpio_b": 1,
        "gpio_c": 1,
        "wigan_input": 4,
        "tamper": true,
        "force_open": true,
        "network_relay_address": "127.0.0.1",
        "door_sensor_timeout": 3
    },
    "code": 200,
    "msg": "OK"
}