Recognize
Set device recognition parameters
When the use mode of use_mode is single-player mode, the device access parameter modes are all valid; When the use mode of use_mode is multi-player mode, "face" and "face or card swipe" in the device access parameter mode are valid, and multi-authentication is supported;
Request address
/v1/device/recognize
Request method
POST
Body Type:
application/json
Request parameters
use_mode
Int
use mode: 3: single-player mode 4: multi-player mode
multi_auth_mode
Boolean
Multi-authentication switch, false: off true: on
use_mode = 4
multi_auth_timeout
Int
Multi-authentication interval
liveness
Boolean
Liveness detection，false：off true：on
liveness_threshold
Float
Liveness threshold（Default 0.995）
0 < x < 1 , default value: 0.995000
verify_threshold
Float
Verification threshold（Default 0.90）
0 < x < 1 , default value: 0.900000
certificate_threshold
Float
Certification threshold（Default 0.6）
0 < x < 1 , default value: 0.600000
recognition_distance
Int
Face recognition distance (unit: meters)
0.5 < x < 3 , default value: 2.000000
open_interval
Int
Re-identification interval (s)
mask_detect
Boolean
Mask detection switch， false：off；true：on
no_access_without_mask
Boolean
Whether to allow passage without a mask, false: allowed; true: not allowed
no_access_with_mask
Boolean
Whether to allow passage with a mask, false: allowed; true: not allowed
Request example
{
"use_mode": 3,
"multi_auth_mode": false,
"multi_auth_timeout": 3,
"liveness": true,
"liveness_threshold": 0.98,
"verify_threshold": 0.90,
"certificate_threshold": 0.60,
"recognition_distance": 2,
"open_interval": 5,
"mask_detect": true,
"no_access_without_mask": false,
"no_access_with_mask": false
}Response example
{
"data": null,
"code": 200,
"msg": "OK"
}Get device recognition parameters
When the use mode of use_mode is single-player mode, the device access parameter modes are all valid; When the use mode of use_mode is multi-player mode, "face" and "face or card swipe" in the device access parameter mode are valid, and multi-authentication is supported;
Request address
/v1/device/recognize
Request method
GET
Response example
{
"data": {
"use_mode": 3,
"multi_auth_mode": false,
"multi_auth_timeout": 3,
"liveness": true,
"liveness_threshold": 0.9800000190734863,
"verify_threshold": 0.8999999761581421,
"certificate_threshold": 0.6000000238418579,
"recognition_distance": 2,
"open_interval": 5,
"mask_detect": false,
"no_access_without_mask": true,
"no_access_with_mask": false
},
"code": 200,
"msg": "OK"
}Last updated